#

Company
Overview

Affordable, reliable high-end performers are what we do and what we deliver. Our ranges of professional audio video connectivity products enable HD signal transmissions cost effectively, while you broadcasts, extend, split or multiply.

The range of areas where our audio video connectivity products have an application are unlimited and given your expectations of superior reception of audio video signals, we deliver the best.
Extenders control
accell_1
Integrated IR/RS-232
and Relay Controller

The KanexPro CR-3XCONTROL is a central control system designed to control wide variety of devices such as projectors, dvd players and other audio-video IR, RS-232 and relay based sources. It comes with eight external trigger connections which directly activates 8 (of 16 total) user defined macro events stored within the unit. All 16 macros are accessible can be activated via the WebGUI, or by Telnet.

  • Integrated IR/RS-232 and Relay Controller
  • 8 trigger inputs linked directly to 8 user macros allowing instant control
  • 4 relay trigger outputs to control devices such as projector screens, lighting, etc.
  • 4 IR outputs to control devices such as TVs, blu-ray players, media players, etc.
  • Integrated IR code learning functionality
  • Multiple user control interfaces including WebGUI, Telnet and RS-232
  • Simple configuration of macros, triggers and relay settings via the WebGUI
  • PoE (Power over Ethernet) support
  • Firmware can easily be updated in the field via USB
accell_1
8-button Control
based IP Keypad

This KanexPro WP-IPKEYPAD8 is an easy to use, programmable eight button multi-purpose key pad based over TCP/IP for controlling various audio-visual devices such as DVD players, projectors, relay bases screens and much more. These keypads can send commands to any Ethernet or relay trigger controlled device in your AV system. With up to 16 physical macro buttons and up to an additional 16 software based macro buttons (8 each on singe-gang version). Pre-program and recall up to 32 (16 on the single gang) distinct macros delivering complete control over your audio and video application.

  • US single gang wall plate design with adjustable LED brightness
  • Eight customizable backlit buttons
  • Up to 128 total commands can be stored and used across all macros in the system (up to 16 per macro)
  • Supports relay triggers to control compatible devices
  • Supports time and date macro scheduling (single and recurring)
  • Supports customizable daylight savings time settings for scheduling
  • Can be controlled via Keypad, Telnet & WebGUI control
  • PoE –powered over Ethernet or DC power supply
  • TCP/IP Ethernet control for simple set up and programming
  • Built-in WEB GUI provides fast and simple set-up
  • Mini USB port - behind decorator-style wallplate for easy configuration access
  • Sticker labels for buttons included for controller customization
Audio Converters
accell_1
Mini 3-input Audio Amplifier
with Mic Mixer

The KanexPro AP3DBL is a 3-Input 40-Watt audio amplifier supporting 70V or 100V. It comprises of 3 switchable inputs (RCA, 3.5mm and TOSLINK) for quick switching and sound reproduction. The audio amplifier supports MIC mixing and EQ control perfect for classrooms, conference rooms, lecture halls and restaurants.

  • Fast switching 3 audio inputs (1 digital, 2 analog)
  • One 3-level MIC input with mixer function
  • 40 Watt amplifier output at 70V or 100V
  • Ducking function for auto detect
  • ID loop for RS232 looping control
  • Adjustable volume with Bass & treble
  • Locking power supply
  • Control via front panel, RS232 & IR control
  • Supports Dual-mono output
  • Built-in Microphone mixer (separately controllable)
  • Line audio output, with volume controllable.
  • MIC input supports 48V phantom power
  • Supports balanced/ unbalanced signals
  • Ultra low inrush current
  • Convection cooled, antistatic case design
  • LED indicator, for power and operating status
  • Internal Universal power adaptable
accell_1
Mini 2-input Audio Amplifier
with Mic Mixer

The KanexPro Mini Audio Amplifier is a quarter-rack width digital amplifier (Class D) with equalizer control and Mic mixer. It’s a simple yet powerful device delivering 2x20 Watts@4Ohm default output with built-in volume/ bass feature. It also supports dual mono-output with 2 stereo audio selectable inputs. The Microphone mixer includes independent volume control with balance switching. Supports balanced/ unbalanced signals.

  • Fast switching audio amplifier
  • 2x20 Watt@4Ohm as the default amplifier output
  • Bridge connection supported by switching the amplifier to be 1x40Watt@8Ohm
  • Supports Dual-mono output
  • Built-in Microphone mixer (separately controllable)
  • Line audio output, with volume controllable.
  • MIC input supports 48V phantom power
  • MIC port with balanced switching suppress
  • Supports balanced/ unbalanced signals
  • Supports Ducking power technology
  • Ultra low inrush current
  • Two stereo audio inputs, switchable by button, remote or RS232.
  • Volume/Bass/Treble controllable by buttons or RS232
  • Optional control by IR remote
  • Convection cooled, antistatic case design
  • LED indicator, for power and operating status
  • Internal Universal power adaptable (100-240 volt AC, 50/60Hz)
accell_1
Digital to Analog
Audio Converter

The KanexPro Digital to Analog Audio adapter converts your digital S/PDIF or Optical (TOSLINK) audio input source to RCA output. Ideal for connecting equipment such as an A/V receiver or a recording deck via the standard RCA connectors. Now you can link your legacy sound system with digital sources such as a Blu-ray player, DVD and CD players that lacks the RCA-style analog outputs. The converter is compact in size and requires minimal setup.

  • Supports output sampling rate at 48 KHz
  • Provides electromagnetic-noise-free transmission
  • Supports uncompressed 2-channel PCM analog stereo audio output.
  • Easy to install and simple to operate
  • Compact size
  • Power supply included
Component Converters
accell_1
HDMI to Component with
Audio Converter

The KanexPro HDMI to Component video with audio converter is a designed for converting HDMI signals such as a laptop, set up box or a media player to legacy component video signals with audio. The converter has a scaler that decodes the HDMI input signal and outputs to various video resolutions up to 1080p with R+L audio. Ideal and cost-effective for legacy home-theater equipment that needs the transformation from HDMI sources.

  • Convert HDMI signal into YPbPr (Component-video) and stereo audio
  • HDCP compliant
  • Built-in scaler function to upscale / downscale video resolutions
  • Connect HDMI based devices to older TV's and projectors
  • HDMI input resolutions up to 1080p (1920x1080@60Hz)
  • Decodes analog audio signal from HDMI
  • Compact size
  • 5V DC external power supply included
Composite Converters
accell_1
Composite/ S-video to 4K
HDMI® Converter

The KanexPro CON-AV-HD4K is a universal scaler converter designed to up-scale one Composite (RCA) or S-video input to HDMI 4Kx2K@60Hz output. The CON-AV-HD4K is capable of converting analog to digital formats with multiple adjustments and range to achieve the most ideal video image using the front panel buttons for scaling & zoom. It is portable and simple plug and play device making it the most ideal converters for scaling analog to 4K digital signal conversion.

  • Scale & Convert S-Video / Composite Video to UltraHD 4K display
  • Built-in scaler to upscale video resolutions up to 4K@60Hz
  • Supports PAL, NTSC3.58, NTSC4.43, SECAM, PAL/M, and PAL/N input format
  • Advanced signal processing with great precision, colors & details
  • Selective Source button to switch between analog sources
  • Selective Resolution and Zoom button to get the best optimal resolution
  • Easy firmware update via Micro-USB
  • 5V DC external power supply included
accell_1
HDMI to Composite with
Audio Converter

The KanexPro HDMI to Composite with Audio Converter is a classic retro fit device, engineered to transform HDMI signals into analog composite video with R/L audio. Connect your HD sources such as Apple TV, Blu-ray players or, PC and game consoles to an analog CRT TV or a old projector that does not have HDMI port. The converter strips audio from HDMI sources and spreads out to two -channel stereo audio for TVs. Includes a front-panel switch that supports PAL/NTSC formats for different regions and works flawlessly with all HDMI devices.

  • Convert HDMI signal into Composite video and audio
  • Supports HDMI input resolutions up to 1080p(1920x1080@60Hz)
  • Analog composite video output up to NTSC 480i or PAL 576i
  • Decodes uncompressed analog audio signal from HDMI
  • Rack or under-desk mountable
  • 5VDC external power supply included
DVI Converters
accell_1
DVI with RCA audio to HDMI
Converter

The KanexPro DVI with RCA audio to HDMI Converter is a high-performance converter designed for maintaining the existing DVI equipped sources up-to-date. It converts digital video (DVI) with RCA(R/L) audio into HDMI by flawlessly integrating all home theater and A/V equipment. It accepts HD 1080p/60 and high-resolution computer-video signals up to 1920x1200. In addition, it also offers audio embedding so that analog audio input signals can be digitized into the HDMI output.

  • Supports data rates to 6.75Gbps
  • Full HD 1080p(1920x1080@60Hz)
  • Connect computers and A/V equipped sources with DVI to an HDMI display
  • Encodes analog audio signal to HDMI
  • HDCP & EDID compliant
  • Compact size
  • 5VDC external power supply included
HDMI Converters
accell_1
18Gbps 4K HDMI® Audio Extractor
with Dolby Atmos®

The KanexPro HAECOAX3 is our 3rd gen. audio extractor designed with 18 Gbps of high bandwidth and supporting the latest HDMI 2.0 specifications. This audio extractor will de-embed HDMI audio streams from any HDMI based device to digital or analog stereo maintaining 4K/60 video resolutions with YUV 4:4:4 color space and pass-thru for HDR 10 (High Dynamic Range). Audio formats include LCPM 2-channel stereo, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master audio with audio sampling rate up to 192kHz.

  • 4K/60 HDMI Audio Extractor with Dolby Atmos®
  • Select your bit-stream audio by switching instantly
  • 18 Gbps bandwidth with latest HDMI 2.0 Specs
  • Supports HDMI® HBR (High Bit Rate) audio pass-through
  • Supports HDR 10(High Dynamic Range) pass-through for wide color gamut
  • Supports video resolutions up to 4K@24/30/50/60Hz (YUV4:4:4) & 1080p HD
  • De-embeds audio to multi-channel digital via TOSLINK / SPDIF or analog
  • HDCP 2.2 compliant
  • CEC- pass through
  • HDMI audio output: PCM 2, 5.1, 7.1, Dolby 5.1, DTS 5.1, D-TrueHD & DTS-HD
  • Supports uncompressed audio such as LPCM
  • Converts 2CH from 24-bit up to 192 kHz audio
  • Automatic input cable equalization
accell_1
Audio De-Embedder
with 3D Support

The KanexPro Audio De-Embedder is a simple device, designed to extract HDMI audio from HDMI signals. It outputs to analog 2-channel stereo or to digital S/PDIF providing multichannel audio up to 5.1 surround sound. Supports data rates up to 6.75 Gbps to all channels with HDMI 1.3 Deep Color. The audio de-embedder is HDCP compliant, displaying resolutions to 1080p/60 and PC resolutions up to 1920x1200.

  • De-embeds HDMI audio output simultaneously to Stereo and S/PDIF
  • Converts 2CH from 24-bit up to 192 kHz audio
  • HDCP compliant
  • Supports 3D & CEC pass-through
  • Supports selectable audio through switching
  • Audio: 2.0CH/5.1CH selection through
  • HD resolution to full 1080p/60
  • Supports data rates up to 6.75Gbps
  • Automatic cable input equalization
  • Supports Color Depth up to 12-bit per channe
  • Supports uncompressed audio such as LPCM
  • Supports compressed audio such as DTS Digital, Dolby Digital
Fiber Optic Extenders
accell_1
HDMI Fiber Optic Extender with
4K/60 up to 300 meters

The KanexPro EXT-4KFIBERPRO is an HDMI 2.0 extender set engineered to extend 4Kx2K@60Hz with 4:4:4 Chroma Sampling rate and HDR up to 984ft. (300m) with zero latency. Compliant with HDCP 2.2, the set includes one transmitter and one receiver via two- single mode optical fiber ports or two OM3/OM4 multi-mode fiber cables. Front panel Dip switch allows SPDIF ports on both the sender and receiver to function as ARC (Audio Return Channel) mode or normal audio support for downstream devices. This extender can also be controlled over fiber via bi-directional IR and RS-323C.

  • Send secure, uncompressed and RF/ EMI free video and audio over fiber
  • Works with single mode or multi-mode
  • Supports HDR, Dolby Vision and 4:4:4 Chroma sampling rate
  • Built-in LC connectors on both the transmitter & receiver
  • Extends 4K/60 up to 984ft. (300m)
  • Extends 1080p/60 up to 1300ft. (400m)
  • HDCP 2.2 Compliant
  • Supports Audio Return Channel (ARC), EDID & CEC channels
  • Bi-directional IR and RS232 pass-though.
  • Slim chassis design
  • Micro–USB port for on the spot firmware update
  • Locking power supply & mounting ears
  • Backed by KanexPro 3-year warranty for parts & labor
accell_1
Fiber Optic SDI Extender
Set - Up to 6.2 miles (10Km)

The KanexPro Fiber Optic SDI Extender is a simple extender designed for extending 3G-SDI & HD-SDI signals over fiber up to a distance of 6.2 miles (10 Kilometers). Supporting resolutions up to HD 1080p/60. The fiber extender uses pluggable and interchangeable fiber SFP design with LC connector.

  • Convert and Extend SDI signals over Fiber LC
  • Ideal for long haul transmissions
  • Built-in signal equalizer & re-clock function
  • Auto-sensing for 3G/HD/SD-SDI signals
  • SDI Supported HD formats:
  • 720p/50 & 60
  • 1080i/50 & 60
  • 1080p/24, 25, 30, 50 & 60
  • SDI video formats: 525i & 625i SD D1
  • Audio format support up to 8-channel@24 bit, 48KHz
  • Mini –USB port for firmware update
  • Compact & rugged housing
  • Locking power supply & mounting ears
HDBaseT Extenders
accell_1
4K/30 HDMI® Extender
over HDBaseT™

The KanexPro EXT-HDBT70C is an HDCP 2.2 compliant extender set consisting of a transmitter and receiver. It uses HDBaseT technology to transmit uncompressed, high-resolution 1080p/ 4K signals from transmitter to the receiver via a CAT5e/CAT6a cable at a distance of up to 70/40m. Moreover, the extender set supports PoC (power over cable) from either side of the sender or receiver, CEC, bi- directional RS232 & IR control.

  • Basic point-to-point HDMI extender over HDBaseT
  • Extend full HD 1080p up to 70m (230ft.)
  • Extend 4K/30 up to 40m (131ft.)
  • Supports Ultra HD 4K@30Hz resolutions
  • Video resolutions from 1080p/60@48bit
  • Bi-directional PoC (power over cable)
  • HDCP 2.2 & EDID compliant
  • Bandwidth 10.2 Gbps
  • Bi-directional RS-232 & IR control
  • Supports CEC/IR/RS-232 pass-thru
  • IR input/output - embedded over CATx extension
  • Dolby TrueHD & DTS Master Audio ready
  • Supports uncompressed audio - LPCM
  • Includes separate mounting ears
  • One locking power supply included
accell_1
HDMI® 150m Extender over
HDBaseT™ w/ loop out

The KanexPro EXT-HDBT150M is a transmitter - receiver set which enables you to extend 1080p/60 HD signals up to 492 feet (150 meters) over single CAT6 cable using HDBaseT Technology. It supports HDCP 1.4 with EDID pass-through.The extender supports PoE (power over Ethernet) requiring you to power from either the sender or receiver side. Locking power supplies gives you the utmost flexibility and secures HDMI cables in place to eliminate intermittent signal loss or disconnected HDMI cables. For control, the extender offers IR support and RS-232C for bi-directional control of devices to and from the extender.

  • Compact 150m HDMI extender over CAT6
  • Extends up to 492ft. (150m) with full HD 1080p/60
  • Local HDMI loop out on Tx (sender)
  • Bi-directional PoE (Power over Ethernet)
  • HDCP 1.4 & EDID compliant
  • IR input/output - embedded over CATx extension
  • Dolby TrueHD & DTS Master Audio support
  • Supports uncompressed audio - LPCM
  • Bi-directional RS-232 & IR control
  • One locking power supply included
accell_1
UltraSlim 4K/60 HDMI® 2.0 Extender
over HDBaseT™ up to 330ft & PoH

The KanexPro EXT-100SL18G extender is an UltraSlim 4K /60Hz transmitter - receiver set designed to extend natural and uncompressed ultra HD 4K signals from your HDMI source device to a 4K display remotely located 230 feet away and full HD 1080p signals up to 330ft.(100m). It also supports PoH (power over HDBaseT) requiring you to power only from one side, either the sender or receiver. For dynamic range and wide color range (gamut) HDR and 4:4:4 Chroma color sampling are one of the key features of these extenders.

  • Ultra Slim 330ft. (100m) HDMI extender over HDBaseT w/ PoH
  • Extend up to 70m for 4K/60 video w/ 4:4:4 Chroma
  • HDR (high dynamic range) & wider color gamut support
  • Supports Ultra HD 4K@60Hz resolutions
  • Video resolutions from 1080p/60@48bit
  • Integrates 2-Ethernet ports for LAN serving
  • 18 Gbps bandwidth
  • Bi-directional PoH (power over HDBaseT)
  • HDCP 2.2 and EDID compliant
  • CEC Pass-thru
  • IR input/output - embedded over CATx extension
  • Dolby TrueHD & DTS Master Audio ready
  • Supports uncompressed audio - LPCM
  • Bi-directional RS-232 & IR control
  • Ultra Slim enclosure w/ separate mounting ears
  • One locking power supply included
HDMI Extenders
accell_1
HDMI Extender over
CAT6 up to 196ft. (60m)

The KanexPro EXT-HD60M is a compact HDMI Extender with local HDMI output designed to carry DVI/ HDMI signals over distances beyond the capability of standard HDMI/ DVI cable. It extends video and audio over a single CAT6 cable up to 196ft. (60m) and is compliant with HDCP and EDID to enhance Deep Color and optimal resolutions up to HD 1080p/60.

  • Extend DVI/HDMI over CAT6 cable up to 196ft. (60m)
  • Local HDMI output on Transmitter for preview
  • Supports full HD 1080p (1920x1080@60Hz)
  • Digital audio support
  • HDCP & EDID compliant
  • Full IR control over CAT6
  • Supports 16-bit per channel (48-bit all channels)
  • Compact metal enclosure
  • Built-in mounting kits
  • Easy to install
accell_1
HDMI Extender over
CAT5/6 up to 164ft. (50m)

The KanexPro HDEXT50M extender is a set of transmitter and receiver which sends full HD 1080p/60 HDMI signals over CAT5/5e cable up to 164ft. (50m). Local HDMI out for preview is built-in to the transmitter to quick view using confidence monitor. For control, the extender set can send/ receive IR signals from each other over CAT5/5e cable with IR pass-through.

  • Extend DVI/HDMI over cost-effective Cat5 cable up to 164 ft. (50m)
  • Supports full HD 1080p (1920x1080@60Hz)
  • Local HDMI output (loop out)
  • Built-in EDID to ensure proper HDMI transmission
  • Built in EQ button on the side to compensate for signal equalization
  • Digital audio support through HDMI
  • HDCP 1.4 compliant
  • Bi-directional wideband IR control
  • Plug & Play - no set-up required
  • Includes IR kits & Micro USB based power supplies
NetworkAV Extenders
accell_1
NetworkAV™over IP
Encoder w/ POE & RS-232

The KanexPro EXT-NETAVTX is an AV over IP encoder/ sender with one HDMI input , one local HDMI output, phoenix connectors for audio in and out and a LAN (Ethernet) port with RS-232 control port. The encoders uses advanced H.264 compression algorithm to transmit full HD 1080p/60 from HDMI based devices with lossless video and audio with latency up to 1.5 milliseconds. It supports POE (power over Ethernet) when connected with a POE network switch with distances over a single CATx up to 330 ft. (100m) delivering one to one, one to many and many to many over the Ethernet switch.

  • Encode AV over IP up to 330ft. (100m)
  • Create a Video Wall or a Multiview experience with 100's of screens
  • Local HDMI output on sender with Audio IN
  • Unicast, Multicast, Matrix, Video Wall and Multi-viewer (up to 5 windows)
  • Unlimited scalability (based on network topology)
  • Low 1.5 frames per second latency
  • Video resolution up to 1080p/60Hz (4:4:4)
  • POE supported requiring no power supplies when used with POE switch
  • Supports Audio Embedding on the encoder
  • Works with 1G standard IP switch
  • Works with H.264 IP Camera
  • H.264 Encoding/Decoding compression
  • Control via RS-232 & Web-based GUI controller built-into the Encoder
  • Compact design for an easy and flexible installation to rack
accell_1
NetworkAV™over
IP Decoder w/ POE & RS-232

The KanexPro EXT-NETAVTRX is an AV over IP decoder/ receiver with one HDMI input , phoenix connectors for audio output and a LAN (Ethernet) port with RS-232 control port. The decoder uses advanced H.264 compression algorithm to transmit full HD 1080p/60 to HDMI based displays with lossless video and audio with latency up to 1.5 milliseconds. It supports POE (power over Ethernet) when connected with a POE enabled network switch with distances over a single CATx up to 330 ft. (100m) delivering one to one, one to many and many to many over the Ethernet switch.

  • Decode AV over IP up to 330ft. (100m)
  • Create a Video Wall or a Multiview experience with 100's of screens
  • Unicast, Multicast, Matrix, Video Wall and Multi-viewer (up to 5 windows)
  • Unlimited scalability (based on network topology)
  • Low 1.5 frames per second latency
  • Video resolution up to 1080p/60Hz (4:4:4)
  • POE supported requiring no power supplies when used with POE switch
  • Supports Audio De-embedding on the decoder
  • Works with 1G standard IP switch
  • Works with H.264 IP Camera
  • H.264 Encoding/Decoding compression
  • Control via RS-232 & Web-based GUI controller built-into the Encoder
  • Compact design for an easy and flexible installation to rack
accell_1
NetworkAV™ H.264 HDMI® Transmitter
over IP w/ POE & RS-232

The KanexPro EXT-AVIPH264TX is an AV over IP transmitter with an HDMI input and Ethernet out which uses advanced H.264 compression algorithm to transmit full HD 1080p from HDMI based sources with less bandwidth over LAN network. It supports PoE (power over Ethernet) with distances over a single CATx up to 394 ft. (120m) delivering one to one, one to many and many to many over the Ethernet switch.

  • Encode and extend pure 1080p resolutions up to 394' / 120 meters
  • Features real-time AV coding and decoding to broadcast 1080p
  • H.264 Compression technology
  • Can be used with DVI connection
  • Supports one to many, many to many and point to point broadcasting
  • Dual power input: 802.3af compliant w/ POE & DC 5V
  • No need power supply when connecting with POE Switch
  • Can be cascaded to multiple AV over IP Extenders
  • Support LPCM audio format
  • Smart IP Address Setting: Dynamic Host Configuration Protocol (DHCP)
  • Wide-band IR pass through to control the source (38khz to 56khz)
  • By pass 2 - way UART/RS232 (Up to 115200), use remote controller to select 8 group Baud rate
  • Support one to one, one to many, many to one, many to many modes, with large cascading
HDMI Switchers
switchers
2-Input Collaboration System
for Huddle Rooms

The KanexPro SW-2X14KUSBC switcher addresses the everincreasing need to connect USB-C based laptops, tablets, and other devices in conference rooms and small huddle rooms. The SW-2X14KUSBC is intelligently designed to auto-switch between two devices. It supports video resolution up to 4K@60Hz 4:4:4 8-bit, 2K@60

  • A true 4K/60, 2x1 auto-switcher with HDMI 2.0 and USB-C inputs
  • Intelligent Automatic switching
  • Provides charging on USB-C port up to 60W perfect for MacBook & iPads
  • Controllable via front panel buttons & RS232C
  • Built-in EDID management
  • 4Kx2K@60Hz 4:4:4, HDR 10, Dolby Vision & HDCP 2.2.
  • Provides USB data (USB 3.0/2.0) and 4K video transmission on USB-C port.
  • Balanced analog audio for audio de-embedding.
  • Smart EDID management capable for various applications and customized setting.
  • Control via front panel buttons
  • Handles CEC & RS- 232 commands for display control such as, (ON, OFF, MUTE, VOL+, VOL -)
  • Low profile, perfect for lecterns, small to medium sized huddle rooms
  • International, locking power supply
switchers
UltraSlim 4K HDMI® 4x1 Switcher
with 4:4:4 Color Space & 18G

The KanexPro SW-4X1SL18G is an UltraSlim auto-switcher with 4–input and 1-output which auto-identifies input resolutions of up to four HDMI devices to one 4K display supporting full 4:4:4 YUV color space and 18 Gbps of bandwidth.This switcher can be controlled from the front panel, IR Remote, or by sending RS-232 commands, the corresponding indicator will illuminate to show real-time switching status.

  • UltraSlim 4x1 HDMI switcher w/ ARC
  • Auto-switching enabled
  • Supports 4K x 2K@60Hz
  • Supports YUV 4:4:4 color space
  • Incredibly thin design – only 0.4” (11 mm) thick
  • High-bandwidth 18 Gbps
  • HDCP 2.2 compliant
  • Transmits 4K over HDMI cable up to 10m (32ft.)
  • DMI supports ARC (Audio Return Channel)
  • Auto-identifies input resolutions to match displays via hot-plug
  • Supports CEC to control source or display device via IR Remote & RS232 commands.
  • Supports EDID management
  • Micro USB port for firmware update
  • Control via RS-232, IR & front panel buttons
  • Remote control included
switchers
4K/30Hz HDMI
3X1 Switcher

The KanexPro SW-HD20-3X14K is a high-performance, three HDMI input to one HDMI output switcher engineered to support True4K UHD resolutions up to 4K@30Hz with HDCP2.2 specifications. It also supports all 3D TV formats and Full HD 1080p resolutions. Instantly switch between your 4K HDMI devices to one display and control the switch using IR remote included.

  • Auto switch three HDMI sources to one 4K display
  • 4K@60Hz UHD, 1080p & 3D resolutions
  • 4Kx2K @30Hz with 24bit RGB, YCBCR 4:4:4 & YCBCR 4:2:2.
  • Computer resolutions up to QSXGA@60Hz
  • Supports 3D frame sequential video formats to 1080p @60Hz
  • HDCP 2.2 compliant
  • Digital audio support: LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
  • High bandwidth for ultimate video experience
  • Front-panel LED’s for input/ output signal presence
  • Ultra compact design
  • 5V DC external power supply included
  • Includes IR remote
Matrix Switchers
switchers
4K/60 HDBaseT™ 8X8 Matrix
Switcher with Audio Matrix

The KanexPro MX-HDBT8X818G matrix switcher is a professional 8 HDMI input to 6 HDBaseT output with 2 local HDMI output switches designed for switching and extending HDR, Dolby Vision content with digital audio to multiple zones with simple control.

  • Ultra-fast 8x8 switching with instant display
  • Distribute four HDBaseT outputs up to 100m
  • Up to 35m at 4Kx2K/60Hz on a single CAT5e/6 cable
  • HDMI output supports HDR + DolbyVision
  • HDR, ARC, CEC and smart EDID management supported
  • Supports power over Ethernet (PoE) to all six receivers
  • Includes all 6 receivers in the box
  • Indpendent audio matrix
  • Supports Audio De-embedding
  • HDCP 2.2 compliant
  • Bi-directional IR & RS-232 control
  • Ethernet connectivity for WebGUI
  • Control via front panel, RS232, IR or IP
  • Illuminated buttons w/ Front panel LCD
  • IR remote control included
  • Easy firmware upgrade thru Micro-USB port
  • Locking HDMI connectors
  • 19" (1U) rack-mountable steel enclosure
  • External International power supply (100V-240V AC,50/60Hz)
switchers
4x2 HDMI®2.0, 4K/60 Matrix
Switcher w/ HDR10 & EDID Management

The KanexPro HDMX42-18G is an easy to use, cost-effective 4K/60Hz with 4:4:4, 16-bit Deep Color, HDR (High Dynamic Range) and HD audio formats based on HDMI 2.0 specs. Designed with 4-inputs and 2-outputs. For swift switching and routing of any HDMI sources such as laptops, Blu-ray players, and 4K based Apple TV to any four displays.

  • Switch 4 HDMI devices to 2 Displays with 4K/60 + HDR & 4:4:4
  • Supports the matrix routing of four 18Gbps HDMI inputs to two 18Gbps HDMI outputs
  • Supports resolutions up to 4096×2160@60Hz (4:4:4, 8-bit)
  • HDMI 2.0 and DVI 1.0 compliant
  • HDCP 1.4 and 2.2 compliant
  • Maximum data rate up to 18Gbps with Deep Color support up to 16-bit at 1080p
  • Supports pass-through of LPCM 7.1, Bit stream and HD Bit stream audio formats
  • Supports EDID management via five pre-defined internal EDIDs and two external EDID options
  • Multiple control interfaces including RS-232, Telnet, WebGUI and IR remote
switchers
4x4 HDMI 4K/60
Matrix Switcher

The KanexPro SW-HDMX44CE is a simple and cost-effective 4K based HDMI matrix designed with 4-inputs and 4-outputs. For swift switching and routing of any HDMI sources such as laptops, Blu-ray players, and 4K based Apple TV to any four displays. This matrix switcher is HDCP 2.2 compliant and supports 4K@60Hz, 4:2:0 video. it can be controlled via front panel buttons, IR remote and RS232 commands.

  • Cross switch 4-HDMI sources to 4-HDMI displays with 4K/60Hz
  • Supports sampling rate of 4:2:0, including 1080p & 3D video
  • Fully compliant with the HDMI 1.4 and HDCP 2.2 specifications
  • Smart EDID management to match the connected displays
  • Supports front panel buttons, IR remote and RS232 control
  • Includes IR kit and remote
4k Matrix Modular Switchers
switchers
4K Flexible 32 Input / Output
Seamless Matrix Switcher

The KanexPro FLEX-MMX32 is a 4K seamless video modular matrix designed with thirty-two (32) adaptable PCIe slots. 24 cards for input / output and 8 - dedicated video output for use with single 4K HDMI and HDBaseT™ output cards. System integrators can create a flexible and glitch-free AV system based on project requirements ranging from 31x1,16x16, 8x16-to-16x8 input and output combinations supporting full HDCP 2.2 with PoH (Power over HDBaseT) up to 230 feet.

  • Flexible Matrix Switcher with 32 PCIE slots
  • 24 I/O slots & 8 dedicated outputs
  • 4K glitch-free seamless switching
  • Supports video resolutions up to 4K, 1080p & WUXGA
  • VGA, DVI, SDI, HDMI & HDBaseT card compatibility
  • Auto-sensing of input or output signals
  • Built-in EDID management
  • HDCP 2.2 compliant
  • Controllable via front panel buttons, IR, RS232 & TCP/IP
  • Built-in web based GUI for quick access to control via network
  • Adjustable output resolution
  • Firmware upgrade via USB port
  • 10 global presets
  • Internal power supply (100Volt~240Volt AC, 50/60Hz)
switchers
4K Flexible 16 Input / Output
Seamless Matrix Switcher

The KanexPro FLEX-MMX16 is a 4K seamless video modular matrix designed with sixteen (16) adaptable PCIe slots. Twelve cards for input / output and 4 - dedicated video output for use with single 4K HDMI and HDBaseT™ input and output cards. System integrators can create a flexible and glitch-free AV system based on project requirements ranging from 15x1,8x8,4x8-to-1x11 input and output combinations supporting full HDCP 2.2 with PoH (Power over HDBaseT) up to 230 feet.

  • Flexible Matrix Switcher with 16 PCIE slots
  • 12 I/O slots & 4 dedicated outputs
  • 4K glitch-free seamless switching
  • Supports video resolutions up to 4K, 1080p & WUXGA
  • VGA, DVI, SDI, HDMI & HDBaseT card compatibility
  • Auto-sensing of input or output signals
  • Built-in EDID management
  • HDCP 2.2 compliant
  • Controllable via front panel buttons, IR, RS232 & TCP/IP
  • Built-in web based GUI for quick access to control via network
  • Adjustable output resolution
  • Firmware upgrade via USB port
  • 10 global presets
  • Internal power supply (100Volt~240Volt AC, 50/60Hz)
switchers
4K UHD 16x16 Modular
Matrix Switcher

The KanexPro HDMMX1616-4K is a sixteen input by sixteen output modular matrix switcher chassis with four input slots and four output slots; each modular input or output card supports up to four device connections. As an add-on to front panel control, the HDMMX1616-4K can be controlled via IR, RS232, or TCP/IP connections.

  • Customizable 16x16 modular switch serving various AV connections
  • 4K UHD resolution via HDMI & HDBaseT
  • Supported connections: VGA, SDI, DVI, HDMI, HDBaseT & Fiber optic
  • High-bandwidth up to 10.2 Gbps
  • Add I/O modular cards based on expandability
  • Cross-point ultra-switching
  • Advanced HDCP & EDID management
  • Hot swappable design
  • Clear illuminated buttons
  • Control via IR, Ethernet & RS-232
  • 10 global presets
  • Front panel LCD for switching & status
  • Front panel security lock
  • 3 RU rack-mountable aluminum enclosure
  • Dual-Internal power supply (100Volt~240Volt AC, 50/60Hz)
Matrix Modules Switchers
switchers
Flexible One Input
VGA card with Audio

The KanexPro FLEX-IN-VGA is a seamless one input VGA card with analog audio input compatible with YPbPr, C-video and S-video signals designed for FLEX-MMX chassis supporting video resolutions up to 1080p/60 HD and PC resolutions up to 1920x1200@60Hz. The card is compliant to HDCP and supports EDID management from the switcher.

  • Single one input seamless VGA (YPbPr, C-video and S-video) card
  • Stereo analog audio input
  • Supported resolutions: 1920x1200, 1080p/60
  • Plug & play, easily fits in to the FLEX-MMX series
switchers
Flexible One Output
VGA card with Audio

The KanexPro FLEX-OUT-VGA is a seamless one Output VGA card with analog audio output compatible with YPbPr, C-video and S-video signals designed for FLEX-MMX chassis supporting video resolutions up to 1080p/60 HD and PC resolutions up to 1920x1200@60Hz. The card is compliant to HDCP and supports EDID management from the switcher.

  • Single one output seamless VGA (YPbPr, C-video and S-video) card
  • Stereo analog audio output
  • Supported resolutions: 1920x1200, 1080p/60
  • Plug & play, easily fits in to the FLEX-MMX series
switchers
Flexible One Input
SDI card with Loop out

The KanexPro FLEX-IN-SDI is a seamless one input SDI card supporting 3G-SDI, HD-SDI and standard SDI formats with one loop out function designed for FLEX-MMX chassis. It supports video resolutions up to 1080p with transmission distance up to 524 feet (160 meters). The SDI input card can be used on a FLEX-MMX matrix switcher to output with video signals such as VGA, DVI, HDMI and HDBaseT output cards.

  • Single one input seamless SDI card
  • Supports embedded audio from SDI source
  • Can be used with 3G-SDI, HD-SDI & SDI devices
  • Supports video resolutions up to1080p/60
  • SDI transmission run up to 524 feet (160 meters)
  • Loop out for SDI monitor
  • Plug & play, easily fits in to the FLEX-MMX series
HDMI Splitters
accell_1
4K HDBaseT™ 1x4 Distribution Amplifier
up to 230 feet (70m) w/4 Receivers

The KanexPro one HDMI input with four output over HDBaseT is a half-rack width distribution amplifier, which reliably broadcasts one HDMI source signal to four Ultra HD 4K displays over single CAT6. It can also be daisy –chained to support up to 12-displays without losing any signal integrity using HDBaseT technology.

  • Broadcast one Input to four 4K UHD displays
  • Extend up to 70 meters over single CAT6
  • HDBaseT outputs supports PoE - No power supply needed on the receivers
  • Built-in DIP switch for EDID management
  • Bandwidth up to 10.2 Gbps
  • Supports computer video up to 1920x1200, including HDTV 1080p/60 & 4K@30Hz
  • Local HDMI output for monitor support
  • Daisy-chainable to up to 12 displays
  • Includes locking HDMI connectors
  • Control via RS-232 & IR loop-in
  • Firmware upgradeable via built-in USB
  • Rack mountable metal enclosure with rack ears
accell_1
HDMI® 1x8 Distribution Amplifier
over CAT5e/6 Outputs

The KanexPro SP-HDCAT1X8 is a one transmitter and eight extenders - receiver set that enables high resolution 1080p HDMI signals to be routed over distances up to 394ft.(120m) significantly beyond the capability of standard HDMI connectivity. When connected using installer friendly CAT5e/6 cables, the transmitter inputs the HDMI signal into eight identical outputs carrying 394 ft./1080p resolution simultaneously from the provided receivers. For control options the 1x8 splitter comes with IR receivers for each of the receivers and provides IR pass-back function to control the HDMI source device remotely from the displays.

  • Distribute & Extend HDMI over single CAT5e/6 to eight HD displays
  • Includes 8-independent receivers
  • Supports transmission distance up to 394 ft. (120m)
  • Supports full HD 1080p (1920 x 1080@60Hz)
  • Control via IR (kits included)
  • Supports 5.1, 7.1 digital audio and uncompressed LPCM
  • Live status indicator thru LED's
  • HDCP 1.4 & EDID support for multiple displays
  • Simple set up with zero configuration
  • Wall-mountable design
accell_1
HDMI® 1x4 Distribution Amplifier
over CAT5e/6 Outputs

The KanexPro SP-HDCAT1X4 is a one transmitter and four receiver amplifier set that enables high resolution 1080p HDMI signals to be routed over distances up to 394ft.(120m) significantly beyond the capability of standard HDMI connectivity. When connected together using four economical and installer friendly CAT5e/6 cables, the transmitter inputs the HDMI signal into four identical outputs carrying 394 ft./1080p resolution simultaneously from the provided receivers. For control options the 1x4 splitter comes with IR receivers for each of the four receivers and provides IR pass-back function to control the HDMI source device remotely from the displays.

  • Distribute & Extend HDMI over Single CAT5e/6 to four HD displays
  • Includes 4-independent receivers
  • Supports transmission distance up to 394 ft. (120m)
  • Supports full HD 1080p (1920 x 1080@60Hz)
  • Can be cascaded to more displays by adding a switch or a router
  • Works on existing network without sacrificing bandwidth
  • Supports 5.1, 7.1 digital audio and uncompressed LPCM
  • Live status indicator thru LED's
  • HDCP 1.4 & EDID support for multiple displays
  • Simple set up with zero configuration
  • Wall-mountable design
accell_1
4K HDMI 1x4 Splitter
with HDCP2.2

The KanexPro SP-HD20-1X44K is an one input, four output HDMI Distribution Amplifier engineered to split 4K quality videos or high res images from one source to four HD 4K displays with resolutions up to 4K@60Hz and HDCP2.2 specifications. Built-in EDID management allows optimal resolution to be selected and properly outputted to avoid response time and delays.

  • Distribute True 4K HDMI video and audio signals to four HD 4K displays
  • 4K@60Hz UHD, 1080p & 3D resolutions
  • 4Kx2K @30Hz with 24bit RGB, YCBCR 4:4:4 & YCBCR 4:2:2
  • 4Kx2K @60Hz with 12bit YCBCR 4:2:0
  • Conforms to High Speed HDMI specifications
  • (Deep color, HD lossless audio formats & Lip Sync)
  • HDCP 2.2 compliant
  • EDID Selector for optimal resolutions
  • Built-in Smart EDID Control
  • Front-panel LED’s for input/ output signal presence
  • Includes 5V DC external power supply
accell_1
4K HDMI 1x2 Splitter
with HDCP2.2

The KanexPro SP-HD20-1X24K is an one input, two output HDMI Distribution Amplifier engineered to split 4K quality videos or high res images from one source to two 4K displays with resolutions up to 4K@60Hz and HDCP2.2 specifications. Built-in EDID management allows optimal resolution to be selected and properly outputted to avoid response time and delays. 00

  • Distribute one 4K HDMI video and audio signals to two displays
  • 4K@60Hz UHD, 1080p & 3D resolutions
  • 4Kx2K @30Hz with 24bit RGB, YCBCR 4:4:4 & YCBCR 4:2:2
  • 4Kx2K @60Hz with 12bit YCBCR 4:2:0
  • Conforms to High Speed HDMI specifications
  • (Deep color, HD lossless audio formats & Lip Sync)
  • EDID Selector for optimal resolutions
  • HDCP 2.2 compliant
  • Built-in Smart EDID Control
  • Front-panel LED’s for input/ output signal presence
  • Includes 5V DC external power supply
HDMI Professional Splitters
accell_1
UltraSlim 4K HDMI® 1X4
Splitter w/ 4:4:4 Color Space & 18G

These 1x2 HDMI® and 1x4 HDMI Splitters allow you to distribute a single HDMI source to two displays. They support video resolutions up to 4K@60Hz (4:4:4) and comply with the HDMI 2.0b and HDCP® 2.2 standards. The splitters feature EDID Auto, Copy, and User Defined functions, can downscale a 4K video signal to 1080p. The powerful splitters send 4K video signals to both 4K and 1080p displays at the same time and unlike most other HDMI splitters this KanexPro scaling unit ensures that you get the best performance from any connected display regardless of the resolution.

  • UltraSlim 1x4 HDMI DA with 4K UHD resolutions
  • Supports 1080p/60 & 4K/60Hz resolutions
  • Supports YUV 4:4:4 color space w/ HDR 10
  • Incredibly thin design – only 0.4” (11 mm) thick
  • High-bandwidth 18 Gbps
  • Transmits 4K up to 10m (32ft.)
  • HDCP 2.2 compliant
  • Auto-identifies input resolutions to match displays
  • Supports EDID management
  • Firmware update via micro USB
  • Perfect for installing behind a thin bezel display
accell_1
4K/60 HDMI 1X2 Splitter with
Downscaling to HD 1080p/60

These 1x2 HDMI® and 1x4 HDMI Splitters allow you to distribute a single HDMI source to two displays. They support video resolutions up to 4K@60Hz (4:4:4) and comply with the HDMI 2.0b and HDCP® 2.2 standards. The splitters feature EDID Auto, Copy, and User Defined functions, can downscale a 4K video signal to 1080p. The powerful splitters send 4K video signals to both 4K and 1080p displays at the same time and unlike most other HDMI splitters this KanexPro scaling unit ensures that you get the best performance from any connected display regardless of the resolution.

  • UltraSlim 1x2 HDMI DA with 4K UHD resolutions
  • Converts 4K UHD content to work with 1080P Displays
  • Supports 1080p/60 & 4K/60Hz resolutions
  • Supports YUC 4:4:4 color space w/ HDR 10
  • Incredibly thin design – only 0.4” (11 mm) thick
  • High-bandwidth 18 Gbps
  • HDCP 2.2 compliant
  • Auto-identifies input resolutions to match displays
  • Supports EDID management
accell_1
4K UHD 1x8 HDMI Distribution
Amplifier w/ HDCP2.2

The KanexPro 1x8 HDMI Distribution Amplifier is an installer-friendly, lightweight HDMI splitter that distributes one HDMI input into eight identical outputs supporting uncompressed 4K UHD resolutions. The conforming outputs also have the ability of buffering and amplifying all the HDMI signals. It can achieve long distance transmission of HDMI signals up to 50 feet (15 meters) or can be combined with our HDBaseT™ Extenders to route distances up to 330 feet (100 meters).

  • Distribute 4K HDMI video and audio signals to up to eight displays
  • Supports full HD 1080p (1920 x 1080@60Hz) & 4K UHD
  • Conforms to High Speed HDMI specifications- (Deep color, HD lossless audio formats & Lip Sync)
  • Supports Dolby Digital, DTS-HD and Dolby True HD audio
  • HDCP 2.2 compliant
  • Built-in Smart EDID Control
  • HDMI audio: LPCM 7.1CH, Dolby TrueHD & DTS-HD Master Audio
  • Front-panel LED’s for input/ output signal presence
  • 5VDC external power supply included
accell_1
4K UHD 1x16 HDMI Distribution
Amplifier w/ HDCP2.2

The KanexPro 1x16 HDMI Distribution Amplifier is an installer-friendly, lightweight HDMI splitter that distributes one HDMI input into sixteen identical outputs supporting uncompressed 4K UHD resolutions. The conforming outputs also have the ability of buffering and amplifying all the HDMI signals. It can achieve long distance transmission of HDMI signals up to 50 feet (15 meters) or can be combined with our HDBaseT™ Extenders to route distances up to 330 feet (100 meters).

  • Distribute 4K HDMI video and audio signals to up to sixteen 4K displays
  • Supports full HD 1080p (1920 x 1080@60Hz) & 4K UHD
  • Conforms to High Speed HDMI 2.0 specifications
  • HDMI Bandwidth up to 18 Gbps
  • Supports Dolby Digital, DTS-HD and Dolby True HD audio
  • HDCP 2.2 compliant
  • Built-in Smart EDID Control
  • Front-panel LED’s for input/ output signal presence
  • 5VDC external power supply included
accell_1
4K HDBaseT™ 1x4 Distribution
Amplifier up to 230 feet (70m)

The KanexPro one HDMI input with four output over HDBaseT is a half-rack width distribution amplifier, which reliably broadcasts one HDMI source signal to four Ultra HD 4K displays over single CAT6. It can also be daisy –chained to support up to 12-displays without losing any signal integrity using HDBaseT technology.

  • Broadcast one Input to four 4K UHD displays
  • Extend up to 70 meters over single CAT6
  • HDBaseT outputs supports PoE - No power supply needed on the receivers
  • Built-in DIP switch for EDID management
  • Bandwidth up to 10.2 Gbps
  • Supports computer video up to 1920x1200, including HDTV 1080p/60 & 4K@30Hz
  • Local HDMI output for monitor support
  • Daisy-chainable to up to 12 displays
  • Includes locking HDMI connectors
  • Control via RS-232 & IR loop-in
  • Firmware upgradeable via built-in USB
  • Rack mountable metal enclosure with rack ears


Curiosity got the better of you?

Click on: visit KanexPro button to explore.

Malco Technologies | mbal investments